Questions and plumbing advice in the Plumbers Arms - For Professional Plumbers only, with 50+ posts..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
- Sticky
- Question
We're running on super speed connections with an awesome server based in France with Caching being controlled by Cloudflare, who cache the forum as local as they can for you on their servers, and then have backups being taken and stored in Germany. We're now a global website, but we should still...
Hi all, a friend of mine has purchased a bath screen for there shower bath. Basically it has your usual piece of glass down the edge of the bath and it also has a small return piece, but the method of jointing the two pieces together is an L channel that you apply silicone too to hold them...
Has anyone got a simple way to connect an air pump to 15mm pipe to rig up a crude air test kit?
Jut want to check I dont have open ends before filling up on my own
Anyone on here that does breakdowns find that as each new winter arrives peoples expectations and cost become more and more unrealistic?
Meaning they expect the parts to be immediately available and the cost to be something daft like 100 quid for a fan replacement.
Oh and they now want no...
That bathroom I'm on. Said they hadn't used the shower for three years. It leaked and didn't drain very well.
Nice little project all first fixed huge open plan living area kitchen , utility room , double bedroom , and cloakroom, all heated by underfloor heating.
This is my first Oso and specifically went for it as all the connections are on the top of the cylinder and the space I had to work with was...
Hi everyone,
I have a small plumbing & heating business and want to start growing it but at the moment i am only doing domestic work and can sometimes be booked up 3 months in advance and other times booking week by week.
I do some work for a couple of small estate agents but again this is...
Hi,
Can someone help me identify the correct replacement cartridge for this Triton shower please?
Cheers Jim
:D
Note this is not a call to put your Christmas tree up yet ;)
Most meter shut offs I see have a white plastic key that is sort of male and fits into a female bit. There are also other's with plastic levers and metal pulls etc but this one needs a female shaped key to fit over an oblong piece. The customer said he asked the water board for one and they...
Can this be used when wet?
I have a problem towel rad tail. Can I remove and liquid ptfe/lock tite 55 Or does it have to be fully dried first?
Removed a old pp Glowworm and cylinder Monday, fitted a new Intergas rapid all going well until I got the hot water pipe tested pipe is leaking under the screed floor no option but to reroute it above ground, not tested the heating pipework yet ?? but not looking good dare not use hep up and...
Are any of you guys fitting boilers and unvented with hot water priority?
What setup are you useing?
How do you size the boiler and cylinder?
I read the page from intergas in this months hvp magazine and would like to learn more
Does anyone get fed up with calls on weekends from people wanting work done or advice.
It would be ok if you advertised that you did weekend work or 24 hour service, but over the last few months - or longer - I'm beginning to get the impression that people expect to call you anytime for...
Went to a Baxi duo Tec 24kw today plate heat exchanger was choked up with debris really bad and no hotwater , did my usual trip to the local car wash and power washed it out cost me £4 mind as took 2 goes , serviced the boiler and the expansion vessel recharged repaired a leak on the sensor all...
Thanking you very muchly twenty characters etc
1574439899
Looks a bit Aqualisa-ish
Hi all,
Would someone give me an idea of what you'd charge to power flush a 10 rad system (I'll hire machine from BSS).
15mm pipework (NOT 8 or 10)
Glow-worm Flexicom 24hx boiler
Open vent.
Cheers Jim
First full strip on this rapid expansion vessel needed repressrising and system topping up other than that not missed a beat in 2 years house is nice and warm the customers bills have not increased so happy days. Cheers kop
Lost a job to BOXT with black friday deal £2000 for a worcester greenstar 30 kw with longer flue and condensate pump and all controls !!!
Feel sorry for the installer fitting that one lol
Thanking you kindly ............
So its a PF election anybody can put up reasons why they should be elected Plumbing Prime Minister
I would if elected implement 2 things
1. Free cheese for every Uk resident any sort for ever
2. Zero diesel duty for all registered GSR, Accredited Plumbers ..and the PF staff
Dan will be PF...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 1
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 2
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 4
-
Show us your fanciest radiators you have installed!!- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 6
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
