Questions and plumbing advice in the Bathrooms, Showers and Wetrooms - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
I have a problem with noise and vibrations from my shower when i first turn it on.
The problem lasts for about 30 seconds after the shower is switched on before it stops.
There is a sink nearby, sometimes if we switch that on slowly before turning on the shower then the shower doesn't make a...
Please can someone tell me the best way of removing a siliconed folding support rail that has been siliconed to a tiled bathroom wall at my mums. I can't get a hacksaw blade in between the wall and the plate and I can't get any thin windscreen cutter wire in as there is no gap. I don't really...
Hi Guy's,
Looking for some advice on an issue I have having with a recently installed thermostatic mixer shower in my ensuite. Everything was working fine for a coupe of months however now the valve has started misbehaving which is resulting in having to turn the temperature valve round further...
plumber has not fitted water supply pipes level to tiles in shower, one side is approx 5-7 mm out of line, can i fit some sort of extension to resolve?
I removed the tile floor in my bathroom to fit vinyl and I noticed that the loo now leaks slightly when I flush it. I haven’t put the vinyl down yet, so I can build up the floor under the loo if needed to put it back to the level it was, but maybe I can re-seat the big plastic flange slightly or...
Have any of you guys used this type of shower trap?
It’s not 2 compression knuckles like most it’s more of a swivel fitting to give an angle. It doesn’t unscrew either.
Hello there all,
I care for my disabled mum and her wet room ceiling has developed small speckles of black mould.
I plan to remove the black mould and then paint the ceiling voer with a decent anti-mould ceiling paint.
Can anyone recommend a decent paint brand? I know of Ronseal and Zinsser but...
Hi all.
Sometime ago I removed our old 1200x800 shower tray and replaced with a Stone resin one. The stone resin tray was much, much heavier than the old one. At the time I didn't give much thought to it, but now I'm wondering which type of tray it would have been.
Other than it weighed no more...
I’m after some advice.
I’ve inherited my parents house. In the process of doing it up.
My dad got a Mira combiflow installed about 15 years ago. Over the last couple of months every so often when it’s turned on the water runs ice cold even if I turn the handle to hottest temp. All other taps...
Hi,
I have just installed a combination all in one WC/small basin….
Out of the fill valve there is a small tube which emits a lot of water during the refill (I believe it is known as a refill tube) and is connected directly into the overflow tube that drains into the pan, Googling suggests...
Hey DIY enthusiasts,
Just wrapped up a drain installation and wanted to share some quick tips for a smooth project:
1. Plan Smart:
Think about the slope, existing pipes, and ideal placement before you start. A good plan saves time.
2. Get the Gear:
Collect all the tools and materials you need...
my bathroom sink (installed 2017) was broken recently and needs replacing. on inspection there is no brand name and only a few markings so I'm guessing its a trade sink that plumbers would buy. The sink has 1708 indented in the china which i guess is a model number but doesnt show up on google...
Hello all,
So been having somewhat of a time with my Aqualisa Quartz 9.5 electric shower. A few.month ago I put up with a few problems it was having and in the end I replaced everything, new engine and new front cover . This was working great for a month or so, but now noticed an intermittent...
Hi, hope all is well!
I’ve fitted a compression cap on two of my shower mixer copper pipes (15mm). One of them has scratches and burring and is very slightly out of shape. It leaked but I added some PFTE tape over the olive and it seems to of done the job. However…
I’m tiling the wall and...
Please advise me. I am a disabled pensioner. I had a wet room fitted just over a year ago using a local authority grant. Builder was employed by local authority. I had no say in who carried out the work.
I have called the builder out under the guarantee several times for water leaks. The shower...
Hi
I've seen a previous thread that is closed now regarding this subject but the end result I could not see.
Our Shower runs hot for 30 seconds then cold. I have changed the thermostat and it still runs cold after 30 seconds.
If we run the hot tap it is better but at best, luke warm. We have a...
Hey, here goes and I hope it works.. never used one of these before!
I have a Sagittarius Ergo mixer shower min bar of pressure required 1 bar.
Connect to this is a 1.5 bar Ora Salamander pump for a positive head, this was connected by a plumber of course and we’ve had it all rigged up...
hi all, hope you are all well,
i was just about to start siliconing my shower tray (long running project) and found the exp date on the tube FEB 23. the silicone is a DOW 785 unopened. it was stored in a cool dark place. is it ok to use?
thanks
Hi folks
I’ve been asked to first fix a basin that has the chrome waste exposed. My problem is that the basin isn’t on site to allow me to get an accurate height for the waste but I do have some dimensions. I will attach a pic if it helps.
I’ve marked it out where the basin height is 870mm...
Hi all. My hot water feed for my shower is on the left and the cold is on the right. My understanding is that this is correct and this is also stated in the instruction manual for my valve.
However when I turn the mixer clockwise cold water is coming out the shower instead of hot water. When...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
-
-
-
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 2
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 3
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 5
-
Show us your fanciest radiators you have installed!!
- Started by Lou
- Replies: 1
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 7
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
