Questions and plumbing advice in the Water Underfloor Heating Advice - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
Water UFH Installers Directory
Water Underfloor Heating Installers Directory. Here we help you find professional expert water underfloor heating installers in our free to use directory. Always use this forum as part of your own research. We can surely find you a water UFH installer with lots of references to check etc. :)
- Threads
- 2
- Messages
- 13
- Views
- 6.7K
Hi all, I've just had my wet UFH connected up and turned on for the first time in my new extension and I've got a couple of questions:
The screed was laid 6 weeks ago and my floor finish tiles haven't been laid but I'm looking to get them laid in about a week, so would like to spend the next...
Hi folks,
I have newish gas boiler in 5-bed period red-brick house.
The ENTIRE house has underfloor heating which works pretty well.
However, my gas boiler provides heat for underfloor heating and also heat for hot water. Obviously these are at totally different temperatures.
ALso, there are...
Hi guys,
I'm having trouble with a newly installed UFH system. There are 2 manifolds, one with 5 loops, the other with 9. Both are made by Herz, model no 1732007. Pump is a Wilo Yonic Para something something. Boiler is Vaillant Elo Block 14.
My trouble is that setting the TMV to its minimum...
Hi Guys
Im after any advice or if someone can recommend a good heating engineer in Thanet ?. I had a Wundafloor manifold installed for our groundfloor and new extension (currently 4 zones running) and im having problems with the whole system now and the plumber is ghosting my calls.
The...
So vinyl instructions say limit is 30c, but that means it'll take longer to get the room hot, which i don't wanna wait. But I also don't wanna destroy the new vinyl I've just laid.
So I thought why not test it.
I have a sous vide machine which will heat water to a consistent temperature, I...
Hi there, just after some advice. I have an underfloor system installed and at the time of laying I had a spare loop put in with a view to adding a conservatory. I've now changed my mind and want instead to add in a single radiator. I can see the unbroken loop protruding into the conservatory...
We had a wet UFH system installed a couple of years ago. Two weeks ago we had vinyl tiles laid. The instruction from the flooring guy is to start the UFH at 5 degrees and increase by 5 degrees per day until we reach a comfortable temperature. Also, instructions from the flooring company read...
- Question
Hi All,
We're been living in a new build property for the past 2 years without any obvious heating issues. We've an underfloor heating system that's split across 4 rooms, and is driven by a Daikin ASHP.
I've occasionally had to take the actuators off in order to release stuck pins after...
Dear community members,
Got a question here in hope someone can help to advise. I recently got my extension done with U/F heating installed. The manifold is in the garage next door so there are four pipes pass through the wall. The work is done and is working ATM. I wanted some plumbing work...
Hi all! So yes, Richter level 7 earthquake at least. I need to plan an underfloor heating for a 4x4 expedition/overlanding off-road vehicle, and it has to be able to withstand hundreds of miles of Australian corrugated roads and many thousands more of very bumpy roads of all sorts. A shaky floor...
Hi guys. Just bench testing my wiring centre. It all performs as it should but the relay makes a bit of a racket while it's waiting for the valves to open before it calls for heat. Only does it on a UFH zone, if using the rad zone its silent as I guess as it's not delaying/activating the pump...
Background story: About 18 years ago we refurbished 75% of our house and self-installed UHF in that part of the property with the help and advice of a good friend of mine (who is also a Gas Safe registered engineer). At the time we purchased a design and complete kit of parts from a young...
The UFH feels a bit patch in a few of the rooms so investigated the UFH controller...
What's this red stuff and should I be concerned about it?
Hi everyone.
A slight conundrum im hoping to get some educated advice on from people who actually know.
Ill be having the whole of my downstairs dug up in order to install insulation (none present) with a 75mm screed on top. Ill then have a wet system underfloor heating installed. My...
I have a gas boiler for DHW and single zone heating (S-plan with TRVs on all radiators). Now I'm retired and my circulation isn't as good as it once was, I have problems in the colder months with cold feet - particularly on tiled or engineered wood panel flooring on the ground floor. I have...
Hi guys
Is it better to have two 2 port valves or one 3 port valve to control the flow to either dhw or underfloor heating ? Cheers
Apologies if its already been covered. I've been asked to quote on a heat only with a solar compatible unvented, the existing system is 10mm microbore gravity fed to rads. I'm confident of the conversion and have my gas safe and G3, I've also been been asked to provide an outlet for, and install...
Currently installing air to water and underfloor.theres this expansion like vessel with two 3/4 iron male threads on top and bottom of it with no bladder on between.its goes before the primary flow hits the cylinder and underfloor manifold.anyone know of its function??we don't do alot of air to...
Hi
Installing single zone ufl with Grundfos pump/mixing valve and heatmiser thermostat - not crystal clear from the diagrams how the control connection to LR/LS should be wired (i.e. red on the pump control diagram)
Any advice much appreciated!
Hi - please help me. I think our UFH is installed incorrectly. Please see pictures (if anyone needs more images I can take them). UFH-Full-View-Labelled - https://ibb.co/3C0MsKD
The problems we have are. The heating takes FOREVER to heat the rooms. The circulation pump is running all the...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 1
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3
-
-
-
-
My son has an Apprentice interview- please help.
- Started by LadsDad
- Replies: 3