Search the forum,

Discuss Outbuilding cold - please help :-) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
Hi, i have an outbuilding about 25 metres away from the house and I want to install a radiator in there. I didnt want to spend days putting the pipe underground and finding it dont work so I got 50 metres of pipe and attached it to (and back) one of the radiators in the conservatory and then to a radiator in the garden, just to test if it would heat up being that far away from the house.

It didnt heat up, in fact the pipes from the conservatory barley warmed up after an hour ( the house rads heated up fine)

Is there a solution to this? Someone suggested fitting an in-line pump next to the radiator in the outbuilding :-/

Thanks guys, much appreciated
 
Electric oil rad
 
You can buy specially insulated pipework for this situation but at 25m you'd be an utter fool to do it.

The pipe outer dia would be approx 300mm, internal pipework of 25-28mm and it'd have to be buried pretty deep.

Then, the modifications to your htg system, including additional controls, & the huge running losses incurred would take donkeys years (if ever) to recover. It will cost you far less to put in good insulation and run electric heating.
 

Reply to Outbuilding cold - please help :-) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
201
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
123
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock