Search the forum,

Discuss Underfloor Heating System in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
5
Hi

What underfloor heating systems do people recommend? I'm thinking of trying out the Buteline system for the job I'm doing at the moment.

Thanks
 
Maincor is my preferred choice so easy to work with and good back up sevice. Grahams plumbers merchants can supply it or available online cheers kop
 
Hi

What underfloor heating systems do people recommend? I'm thinking of trying out the Buteline system for the job I'm doing at the moment.

Thanks
Definitely our forum sponsor Uheat!!! Specialised in ufh.

OR myson ufh
 
I've used Uponor a couple of times but on fairly small jobs where I've not needed to get the likes of Uheat involved. Anything big though and you are better off giving the plans to someone like Uheat to sort out the detail.
 
I've been looking on eBay for pex-al-pex pipe. You can get some really good deals.

Part of me thinks I should stick to named brands. Any thoughts?
 
Stick to a good name if later on down the line you want to be able to get some spares
 
I've been looking on eBay for pex-al-pex pipe. You can get some really good deals.

Part of me thinks I should stick to named brands. Any thoughts?

A significant amount of stuff on eBay is counterfeit and/or rubbish quality. The only way to know what you are getting is to buy high-quality brands from approved stockists.

How do you tell a high-quality brand? A good start is to check that they have a technical department that you can call/email and have a discussion in English with.
 
And maybe not fitting the manifold

I would get the pipe and manifold all from the same company/ manufacturer
 
The pipe is the most important part dont skimp you will live to regret it cheers kop
 
Status
Not open for further replies.

Reply to Underfloor Heating System in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
197
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
275
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
354
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
85
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
226
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock