Search the forum,

Discuss Does anyone know the make or model of this boiler? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
1
Hi, I have just moved into a flat and there are no instructions for the boiler and the cover has come off so I can't work out what make or model my boiler is.

Does anyone recognise this boiler?
Thanks

IMG_0190.JPG
 
Looks like a biasi m90

Rubbish boilers best to replace
 
Some knock them , my pal has one, its over 13 years old , has never broken down and I have serviced it once . Not bad !!
Can a Worcester last that long ???
 
Some knock them , my pal has one, its over 13 years old , has never broken down and I have serviced it once . Not bad !!
Can a Worcester last that long ???

Think it's more the luck of the draw and if there messed with
 
What , Worcester's , lol

No basi :D had a Worcester go 9 years with no service condy trap was its killer could of gone longer if it had been cleaned
 
How about this , pals mum in law had a 13 year old Isar ( she moved last year ) , it never had the case off , true story
 
How about this , pals mum in law had a 13 year old Isar ( she moved last year ) , it never had the case off , true story

Yea I can believe it it's almost like they don't like getting messed around / changed
 
Status
Not open for further replies.

Reply to Does anyone know the make or model of this boiler? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
102
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
217
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
77
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
131
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
191
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock