Search the forum,

Discuss Wiring combi digital clock in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
2
Hi
I have an iqe simplicity combi and want to fit the optional digital clock, I purchased an original but have no wiring diagram, I have fitted the wires on to the back of the clock as I would think they go (see photos) I just want to confirm this is correct before I fit the plug into the boiler, many thanks in advance for any help or advice
15049653860791421056057.jpg
15049654764452061825496.jpg
 
Not worked on these. So I will say that you need a gas safe Engineer to fit the timer. However someone that has worked on them may know better.
 
wrong style of clock for your boiler i would say
 
The part number on the box (iqe box) matches the part number in the manual and it shows the clock ECT in the boiler installation manual it just doesn't show the pin numbers or wire colours for it! Iqe doesn't seem to exist anymore either, seems to be part of sime now
 
Status
Not open for further replies.

Reply to Wiring combi digital clock in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock