Search the forum,

Additional one-pipe radiator

Discuss Additional one-pipe radiator in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

thereisawizza

Plumbers Arms member
Plumber
Gas Engineer
Messages
672
'evening all!

Not posted in a while, been busy having major life dramas! Back in the saddle now and have a quick question. Have got to get an extra rad into a one pipe system and wondered if there is an optimum spacing between tees for the flow and return into the new rad?

Many thanks in advance y'all!
 
Nope just use diverter tee and full flow valves
 
thereisawizza said:
'evening all!

Not posted in a while, been busy having major life dramas! Back in the saddle now and have a quick question. Have got to get an extra rad into a one pipe system and wondered if there is an optimum spacing between tees for the flow and return into the new rad?

Many thanks in advance y'all!
Click to expand...
I hate 1 pipe systems. Really not a fan. They should all be upgraded.
 
ShaunCorbs said:
Nope just use diverter tee and full flow valves
Click to expand...

Ordered a bag of swept tees (could only order a whole bag at a time). What are the best valves to use? Also should I fit a valve inbetween on the flow pipe in case it needs a bit of persuasion?.....
 
thereisawizza said:
Ordered a bag of swept tees (could only order a whole bag at a time). What are the best valves to use? Also should I fit a valve inbetween on the flow pipe in case it needs a bit of persuasion?...
Click to expand...

danfoss and no dont put a valve as you will effect the other rads
 
Status
Not open for further replies.

Reply to Additional one-pipe radiator in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
210
DIwhYdidIstartThis
D
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
223
Firefox
F
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
216
Dave Moore
D
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
226
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
228
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock