Search the forum,

Discuss OK To Solvent Weld Fitting On Painted Pipe? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
272
I need to solvent weld a tee into a 40mm waste pipe. The pipe has been painted with what looks like gloss paint. If I sand this off, will I be able to successfully s/weld the tee on?

Thanks for any advice.
 
Yes needs to be totally paint free and give it a wipe with some

Iso alcohol to remove any dust / wet cloth if you haven't any ISO

And wait for it to be totally dry before gluing anything
 
If you use a junior hack saw. by using the back of the blade.
Stick the pipe through the frame and blade and scrap down as if with a knife, if it take more than a minuet somethings wrong.
 
Status
Not open for further replies.

Reply to OK To Solvent Weld Fitting On Painted Pipe? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock