Search the forum,

Whats with 1 thread showing 5 thumbs up`s and only on the one thread?

Discuss Whats with 1 thread showing 5 thumbs up`s and only on the one thread? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

rpm

rpm

Esteemed
Plumber
Subscribed
Messages
12,703
Anybody know?
 
???
 

Reply to Whats with 1 thread showing 5 thumbs up`s and only on the one thread? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
BSP female fine for BSP male? Need T for Esp-Vessel.
In short: Do suppliers sometimes list BSPT as BSP? I need a tee, 22mm each end with a BSPT in the middle for an expansion vessel to dangle from. Why I think its I've used calipers on the threads and counted them, and the male end sticking out of the vessel is BSPT 3/4 with 14 threads per inch...
Replies
2
Views
336
DannyNotAPlumber
D
A
Radiator Bleed Valve - 1/8-27: Thread Type
Morning all. I hope this is the correct place for this post. If not i'll happily move it to another forum area. I am renovating a property and the old cast iron radiators need a refresh, and i'm going to fit some new bleed valves amongst other things. The female thread in most of the rads...
Replies
4
Views
629
AdamW85
A
abrogard
How to pretest when threaded at each end?
I have a garden setup with metal pipe at each end and a pvc run in the middle. Proposed. That's what i want to do. Join the two with water pressure 1/2" pvc. So the gear is all there. Threaded joiner at each end. Elbows and joiners making the run between. But I realise if the threaded ends...
Replies
2
Views
480
abrogard
abrogard
P
Connector for tap with threaded tails. And should I seal the washer?
Hi I'm going to be fitting a tap like this one: And just wanted to check that this is the correct part for connecting to 15mm copper pipe using compression: https://www.NoLinkingToThis/p/flomasta-compression-straight-tap-connector-15mm-x-1-2-/58294 If not, please could someone let me know...
Replies
8
Views
441
Mike01
M
chloeradhsaw
One Pipe System Ideal Mexico 2 Boiler
Hello friends - I really struggle to understand my heating and hot water system I posted my question on Diynot but it ended up being five pages and couldnt get to the bottom of it and I thought worth asking the elders on here for their view - Hot water temp is 40 Degrees - Ideal Mexico 2...
Replies
10
Views
676
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock