Search the forum,

Discuss Gerebit Flush Valve too short, any ideas how how to make the button sit higher? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
3
I've bought a replacement flush valve for (Geberit 282.350.KD.1 Flush Valve) as the last one fell to pieces, it works perfectly but the top down button is about 2 inches too short to sit in the hole on the cistern lid.

Is there an easy way to get it to sit higher?

You can reach it if you have long enough fingers but it's only a short term solution! Any help appreciated, cheers, Tim
 

Reply to Gerebit Flush Valve too short, any ideas how how to make the button sit higher? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock