Search the forum,

Recent content by Elverstown

  1. E

    Hansgrohe/Peglar low pressure? bath shower diverter top parts?

    Circlip and cover missing, where can I get parts?
  2. E

    Hansgrohe/Peglar low pressure? bath shower diverter top parts?

  3. 37736717_10212879264279848_4623464837387649024_o.jpg

    37736717_10212879264279848_4623464837387649024_o.jpg

  4. E

    Gb pipe heating a small church questions.

    Thanks stani, I'm a bit out of my comfort zone here, its old pipe with no unions anywhere, how do you tee off? cut and try and thread in situ and add unions?
  5. E

    Gb pipe heating a small church questions.

    Thanks all, Croppie, 35sec will still run nicely in a pikeys transit, so that wont work. Stani, my neighbour is an agent for Drufire and he was with me on site visit, could well be the best option, but up against cost issues. Worcester, hadn't thought of pellets, and their are interesting...
  6. E

    Gb pipe heating a small church questions.

    Hi all, looking for help, Went to look at small rural Church heating system during the week, Simi 30 Kw oil boiler feeding into a very old single pipe system running around the perimeter of the walls, approximately 6m x 18m building with about 100m of 1 in gb? no radiators. Problems...
  7. E

    Underfloor heating manifold?

    Crude is being polite, about a foot behind a 400mm kitchen cabinet, no need for all the electronics, just a thermostat to the pump would have done. cowboy renovators of the early naughtys.
  8. E

    Underfloor heating manifold?

    Still dont know what manifold, when I replaced the boiler, their was a single time clock feeding rads roomstat to rads 2 port valve and boiler, open flow to cyl and u/f. with new boiler I have added 3 channel time clock, cyl stat and cyl 2 port valve and volt free switching to boiler. my concern...
  9. E

    Underfloor heating manifold?

    I would agree, but then their is no bypass when the valve closes
  10. E

    Underfloor heating manifold?

    https://lh4.googleusercontent.com/-mhS9-TBvKkg/VDcR4d2lLmI/AAAAAAAAB4w/x6oBAPNBo5A/w469-h833-no/20141009_155400.jpg If you can see this, found this buried behind kitchen units when doing a boiler swap, where should the sensor probe be? thought it was a pulsar system and showed them the picture...
  11. E

    Can Anyone Recommend a RELIABLE VAN?

    I've had a Citroen Dispatch Hdi for 10 years and 220k miles, just wear an tare + ball joints. need to change soon, compact but 3 seats? I also need 10th post:vanish:
  12. E

    Gravity solid fuel with remote cyl + oil

    Thanks Simon, h2 is new to me, looked it up, scheme with buffer overhead makes sence, but panel and tank would be expensive addition to something that is working already, have used Systemlink many times,
  13. E

    Gravity solid fuel with remote cyl + oil

    Hi all, looking for some practical guidance, went to a bungalow to quote on relocating and upgrading oil boiler and controls. Found; 30+ year old house which originally had a Tirolia solid fuel cooker/boiler (now a Stanley stove boiler) with 1 in (28mm) copper rising to attic and traversing...
  14. E

    Testo 327 O2 cell

    Simon johns, Yes, I do a bit of farming, and I spent more than the price of a 310 on my unit last year, and living in the countryside, I'd like to think the air is ok, apart from when there is some FYM spread around. Sadly, I drive but a humble Citroen, and it must be nice to live in a land...
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock