Posting a message to the forum will remove the above advertisement
  1. Checkout our Plumbers Insurance area - heavily discounted Public Liability Insurance and Van Insurance specifically designed for plumbers.

Gasmk1's Recent Activity

  1. Gasmk1 replied to the thread Bosch SKT5102GB/09 Intake Hose.

    Your instructions say preferably cold fill but if you use hit a maximum temp of 60degrees, there are not many machines now that use hot...

    Feb 18, 2018 at 11:51 PM
  2. Gasmk1 replied to the thread Bosch SKT5102GB/09 Intake Hose.

    They can be hot or cold fill according to the instructions. But you are probably better using cold fill.

    Feb 18, 2018 at 7:17 AM
  3. Gasmk1 replied to the thread Boiler size and costs.

    wether there would be 4 or 23 showers running at the same time the points is the system would have to capable of running all the systems...

    Feb 17, 2018 at 2:36 PM
  4. Gasmk1 replied to the thread Underfloor heating wet system-- Any Advice Welcome.

    there is also one of the site sponsors adverts on the page

    Feb 17, 2018 at 2:30 PM
  5. Gasmk1 replied to the thread Underfloor heating wet system-- Any Advice Welcome.

    WARM-BOARD – LOW BUILD UP HEIGHT UNDERFLOOR HEATING SYSTEM

    Feb 17, 2018 at 2:30 PM
  6. Gasmk1 replied to the thread Boiler control with weather optimiser.

    try a look at this one Remote Heating Controls | Vaillant

    Feb 17, 2018 at 11:17 AM
  7. Gasmk1 replied to the thread Radiator leak pouring everywhere.

    As above you could take the head of one of your other rads if the same make and put that on and turn it off but you still need to cap it...

    Feb 17, 2018 at 7:39 AM
  8. Gasmk1 replied to the thread Boiler size and costs.

    You will need very high public liability insurance if you are taking this on think total rebuild costs so will need to be in the 10s of...

    Feb 16, 2018 at 7:57 AM
  9. Gasmk1 replied to the thread Boiler size and costs.

    a lot of work in this and needs to be designed will cost thousands alon for the rads as they will have to be LST. job fort the big boys...

    Feb 15, 2018 at 11:05 AM
  10. Gasmk1 replied to the thread Expired flux keep it bin.

    Its main purpose is to stop the oxidation so I would have thought it shouldn't matter about shelf life if you think back to lead...

    Feb 14, 2018
  11. Gasmk1 replied to the thread Expired flux keep it bin.

    I have had flux for years it still does its job

    Feb 14, 2018