Simon,
I think you're spot on - that is effectively what Telford Tech Support said. The boss has been back this PM and acknowledged the issues and I believe this will now be resolved amicably.
As I indicated in an earlier post I did check plumbers G3 status prior to accepting quote and he is on...
Shaun,
I am unable to comment on the reasons given by Telford but their response was immediate and unequivocal. I believe it is to do with the internal design of the cylinder
( https://www.heatandplumb.com/images/products/telford/dimensions/technical_product_TELTSMI125H.jpg ) .
With regards to...
Hi Shaun,
Yes he is G3 - I checked prior to requesting quote. With regards to the rotation I have spoken to Telford technical support and they advise :
- As fitted the cylinder will not heat the water properly - only about half will be heated because of the ingress of cold
- Flow will be...
Hi Kop,
As requested I have uploaded a few photos to the following link https://photos.app.goo.gl/6Y2VTuDEPzjHFUcm1 .
I would welcome your comments.
Greg
Shaun,
many thanks for prompt reply.
I appreciate the point you make about maintenance but is that the only reason that the manufacturer requires the cylinder to be fitted with the tappings at 12 '0clock?
With regards to the showers - these are fed from the new cylinder (the old storage tank...
Following completion of plumbing work today I would appreciate any advice on the following two issues :
Q1 I have had a 150litre horizontal indirect cylinder (Telford Brand) installed today on an unvented system. After the plumber left I saw the installation instructions which state –
“ The...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.