Search the forum,

Recent content by macka09

  1. M

    Water hammer advice?? (I’ve checked old posts)

    Thanks for the reply. It certainly is fantastic pressure lol. I will check the standing and dynamic pressure on my own property tomorrow. There was a few mains leaks in one of the roads last year come to think of it. I appreciate the advice thanks.
  2. M

    Water hammer advice?? (I’ve checked old posts)

    Hi all. Just had a neighbour knock the door regarding a water hammer issue. My own house developed this issue sometime last year as well which is when the neighbours roughly started. Severn Trent were doing bits and bobs out in the street back then but this is probably a coincidence. Our water...
  3. M

    Worcester 28i expansion vessel hose??

    Yes sorry. I mean can it be accessed without removing the vessel, I don’t believe it can but I’m hoping I’m wrong.
  4. M

    Worcester 28i expansion vessel hose??

    Hi guys. Can this hose be removed without taking the vessel out? Is there a specific tool that makes it doable?? Cheers
  5. M

    2 part reducing sets 10mm to 15mm??

    Do any of you guys use this type of reducer? It doesn’t have an olive and the bottom part of the brass compresses onto the pipe by the looks of it and the top is removable. I haven’t used them before tbh. I can only seem to find the 3 part versions by me.
  6. M

    Pipe slice offers???????

    Hi guys Are there any decent pipe slices on offer at the moment?? Cheers
  7. M

    JT shower waste query??

    No I was just curious if anyone else had seen one as normally it’s just a compression 45
  8. M

    JT shower waste query??

    I’m unsure. It didn’t come apart it just twists.
  9. M

    JT shower waste query??

    Have any of you guys used this type of shower trap? It’s not 2 compression knuckles like most it’s more of a swivel fitting to give an angle. It doesn’t unscrew either.
  10. IMG_0366.jpeg

    IMG_0366.jpeg

  11. M

    Gas hob ignition issues??

    Hi guys Do you bother trying to repair hobs these days or just advise to replace? Family members hob is constantly trying to ignite. I dont do a lot gas these days since leaving my last employer.
  12. M

    Exposed basin pipe work query?

    I can’t say I blame you tbh. If I was a better business man I’d be able to tell them to sod off as well. lol
  13. M

    Exposed basin pipe work query?

    Cheers mate. Unfortunately this is on behalf of someone else and everything needed doing like yesterday. It’s certainly not how I’d do things. This is also going into a macerator so getting a decent fall is also an issue. I appreciate the advice
  14. M

    Exposed basin pipe work query?

    Cheers for this. I do understand I can go much lower but it looks weird if it’s too low, so I was trying to see if anyone could see an issue with it being 670mm really
  15. M

    Exposed basin pipe work query?

    Hi folks I’ve been asked to first fix a basin that has the chrome waste exposed. My problem is that the basin isn’t on site to allow me to get an accurate height for the waste but I do have some dimensions. I will attach a pic if it helps. I’ve marked it out where the basin height is 870mm...
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock