Posting a message to the forum will remove the above advertisement

Matchless.plumb's Recent Activity

  1. Matchless.plumb replied to the thread Powerflushing - Where do you connect it?.

    No i don't !!!! And yes boiler valves are shut because I don't want to flush through the boiler. It ain't good. I always attach my mag...

    Sep 24, 2017 at 12:56 AM
  2. Matchless.plumb replied to the thread Powerflushing - Where do you connect it?.

    Isn't a wind up just wondering as I do not flush through boilers at all.

    Sep 24, 2017 at 12:33 AM
  3. Matchless.plumb replied to the thread Supermod Shaun !!!!!!!.

    What a love between you two guys :) enjoying reading such a love story in the morning:) Sometimes I'm wondering if shauni is actually...

    Sep 23, 2017 at 8:41 AM
  4. Matchless.plumb rated Best's post Winner in the thread Supermod Shaun !!!!!!!.

    That is something that has to be told to people joining the trade. I learnt it too late that some customers are not worth working for..

    Sep 23, 2017 at 8:39 AM
  5. Matchless.plumb liked Best's post in the thread Supermod Shaun !!!!!!!.

    Just noticed that earlier when I realised Shaun was able to edit posts. Shaun has almost single handed run this forum for a long time...

    Sep 23, 2017 at 8:36 AM
  6. Matchless.plumb liked ShaunCorbs's post in the thread Supermod Shaun !!!!!!!.

    ta mate and went past my 13k mark

    Sep 23, 2017 at 8:36 AM
  7. Matchless.plumb rated king of pipes's post Agree in the thread Water meter - Moving.

    Ideally it should be directly after the stop cock but i have come across many remote meters away from the main stopcock especially on a...

    Sep 23, 2017 at 8:35 AM
  8. Matchless.plumb replied to the thread Using Balanced cold.

    If you ask me I'd install all with the balanced cold water even though it's not a mixer. Ideally you take a balanced cold for not having...

    Sep 23, 2017 at 8:32 AM
  9. Matchless.plumb rated Harvest Fields's post Agree in the thread Looking at un-certified boiler ??.

    Fitted last year? Walk away mate. Unless you are completely happy to do it. I wouldn't risk my gas safe to register anybody else's work..

    Sep 22, 2017 at 10:45 PM
  10. Matchless.plumb rated ShaunCorbs's post Agree in the thread Water meter - Moving.

    yes thats fine you can either use tap connectors with the inner raised lip filed off or some female irons

    Sep 22, 2017 at 10:41 PM
  11. Matchless.plumb liked Best's post in the thread My new Wilo Gold 50 central heating pump.

    Yea, - as Shaun said, the 3 port valve body looks fairly new (with old nuts). The circulating pump is definitely old and that exact...

    Sep 22, 2017 at 10:40 PM
  12. Matchless.plumb replied to the thread Tap connector - 1/2 inch to compression?.

    You are quite right how often I see that on 3/8. Especially when buying grohe taps they come always with 3/8" flexi hoses

    Sep 22, 2017 at 9:09 AM
  13. Matchless.plumb replied to the thread Hello from new member.

    Hi Mikey, If you have got the budget for next year to do the whole lot then I would definitely do it. Perhaps your central heating...

    Sep 22, 2017 at 12:00 AM
  14. Matchless.plumb replied to the thread Powerflushing - Where do you connect it?.

    Thanks Rory, How degrees you let the boiler run on ? You are not using any chemicals do you ?

    Sep 21, 2017 at 10:24 AM