Search the forum,

Recent content by mutley racers

  1. M

    Worcester 30i ionisation fault

    Hi all. I hope you are well. Need some advice on this boiler and fault. E229. Went there and condensate was totally blocked so cleaned it and still not fixed. Then serviced it and still got the fault. Called up worcester and one says its the gas valve as it is making a 3 whoosing noises while...
  2. M

    New part L regulations for plumbers.

    Thanks all. Good to know as it would be a rather expensive boiler replacement.
  3. M

    New part L regulations for plumbers.

    Hi all. Just need to clear my head around these changes. I am guessing we do not need to put in new radiators when just replacing a boiler?
  4. M

    Sealant for external flue run.

    Hi all. Got to run a Vailliant flue externally and been told by vailliant I need a heat resistant flexible silicone. Can anyone recommend which silicone to go for? Cheers
  5. M

    Hole size for countertop...

    Then it's really hard to be 100% sure it's not leaking.
  6. M

    Hole size for countertop...

    Threy are all leaking!
  7. M

    Hole size for countertop...

    Good point. Ahold be ok with a diamond holesaw at an angle though a?
  8. M

    Hole size for countertop...

    I need to take the lot out and cut the holes so that the hole waste and flange nut fit into the countertop? Rather than fix the threaded waste through the countertop and tighten the back nut onto the bottom of the countertop. Hope that makes sense. Basically, what size is the back nut to a 11/4...
  9. M

    Hole size for countertop...

    Morning all. What size diamond holesaw do you use for drilling the hole in a quartz countertop for a basin waste to go through? I have a house where they installed all the basins wastes with the nut and washer tightened onto the bottom of the worktop and not the bottom of the basin. Hope that...
  10. M

    Tap identification needed...

    It does look like the cartridge. Out of stock. Look like £80. Wow
  11. M

    Tap identification needed...

    Awesome. Thank you shaun. You have made life easy now.
  12. M

    Tap identification needed...

    Bingo. Spot on that.
  13. M

    Tap identification needed...

    Thanks, will have a looksy later. It's a folding rule that, had since college 15yrs ago
  14. M

    Tap identification needed...

    Morning. Have some bath taps which I am struggling to get cartridges for. Anyone recognise them? The cartridges are about 28mm wide? Cheers
  15. 20230224_132542.jpg

    20230224_132542.jpg

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock