No it wouldn`t have that bit, time to replace the waste which isn`t a daunting job.
Plenty on fleabay or Amazon..
Do you mean where the Black tape is in photo 5539? or the larger nut below on the waste itself?
Rods for Pop Up Sink Waste | eBay
Here you go Liz, many to choose from.
Shorn off, snapped off yes?
Don`t know if you can buy a screw extractor that size or can you use a hacksaw blade and gently cut the broken bit in...
There is one up there who drives a Banana Yellow sports car. Em who could that be I wonder, dunno about cheap though. ;)
You can get any lip seal by the number on it or by measuring the shaft o/d, the seal housing o/d and the depth of the seal housing.
You mean dribbles out of the shower hose so there is no air yes.
Lets try that again with the computer back up.
Maybe a flow switch on the cold side isn`t kicking in, connect the cold supply and switch it all on.
Know nothing about that one, have a play with the controls and see if water comes out now.
Could be air, what sort of shower are we talking, can you remove the shower head and drop the hose down to floor level or as near as you can go...
Easy job to dismantle and replace the cup (lip) seals providing the shaft isn`t scored. If it has been standing idle for some time the rubber lip...
Have you tried the bucket test?
And as there is only the one shaft for drive and I see a mechanical seal protecting the motor from water ingress I...
They are 2 separate chambers with a bush between the two, don`t see a way that water can transfer between the two. Disconnect the cold outlet and...
Separate names with a comma.