Posting a message to the forum will remove the above advertisement

ShaunCorbs's Recent Activity

  1. ShaunCorbs replied to the thread Stuart Turner pump is slow?.

    By the time you talk of insets your internal bore is around 10mm

    Nov 24, 2017 at 8:20 AM
  2. ShaunCorbs replied to the thread 15M pump required, one large Vs 2 small in series?.

    yes and no if there happy with staggering the times then aslong as heatings over the hot water requirement your fine but if they...

    Nov 23, 2017 at 11:04 PM
  3. ShaunCorbs replied to the thread 15M pump required, one large Vs 2 small in series?.

    i would say try a different one ;) just worked it out old school and its 300w out on a single rad

    Nov 23, 2017 at 10:59 PM
  4. ShaunCorbs rated Chuck's post Winner in the thread 15M pump required, one large Vs 2 small in series?.

    Makes no difference to the conclusion whether the system is vented or unvented. You would only need a 15m head if you were trying to...

    Nov 23, 2017 at 10:54 PM
  5. ShaunCorbs replied to the thread 15M pump required, one large Vs 2 small in series?.

    how many rads? seams low only 8 2kw rads you done a room to room heat loss? and not just measured the existing rads?

    Nov 23, 2017 at 10:44 PM
  6. ShaunCorbs replied to the thread 15M pump required, one large Vs 2 small in series?.

    i would say your shy on your heat loss calcs unvented cylinders require 15-20kw on there own

    Nov 23, 2017 at 10:40 PM
  7. ShaunCorbs replied to the thread 15M pump required, one large Vs 2 small in series?.

    unvented cylinder?

    Nov 23, 2017 at 10:33 PM
  8. ShaunCorbs replied to the thread the water heater problem... a thanksgiving mystery????.

    USA mate

    Nov 23, 2017 at 10:25 PM
  9. ShaunCorbs replied to the thread Which fitting do I need?.

    compression male iron gas tap/iso soldered tee to 1/8th pressure test point 1/8th female iron copper tube

    Nov 23, 2017 at 10:23 PM
  10. ShaunCorbs replied to the thread Which fitting do I need?.

    can we have your reg number please never mind found it

    Nov 23, 2017 at 10:21 PM
  11. ShaunCorbs rated Chuck's post Winner in the thread Help designing new boiler solution.

    I recommend that you don't waste time trying to design the system yourself. Instead, spend it finding a couple of local heating...

    Nov 23, 2017 at 9:38 PM
  12. ShaunCorbs replied to the thread Which fitting do I need?.

    are you gas safe?

    Nov 23, 2017 at 9:38 PM
  13. ShaunCorbs replied to the thread Help designing new boiler solution.

    first thing you can do to help is, is to measure the incoming water supply flow and pressure

    Nov 23, 2017 at 9:24 PM