Search the forum,

Discuss Re-presurising boiler not working in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
4
Hi, hope someone can help?
After bleeding radiators I need to re-pressurise, I have tried fully opening both taps on the loop but nothing happens! The taps I'm referring to are circled in red on the picture. Any ideas or I doing something wrong? Thanks, Rich
IMG_1290.jpg
 
I am pretty sure turn one black knob one way and the other one, the opposite way , do it slowly , you should hear the water .
 
If they turn roughly ther probably worn but they don’t look like they’ve had much use. Try turning the right one toward you and the left one away from you
 
yes, i believe the mains is permanent but i'm no plumber my self so not sure, could it be that there's another tap for the main feed that needs turning on (possibly elsewhere from the picture)? I'm definitely turning those black knobs the correct way, thanks
 
The link in between the two tap heads can be removed but I very much doubt that anyone ever does and if they do they'll never find it again, it's in the same place as the fitting and service manual.
 
The link in between the two tap heads can be removed but I very much doubt that anyone ever does and if they do they'll never find it again, it's in the same place as the fitting and service manual.
Same as a normal filling loop then. I remove and cap externals on a service. Then on the service next year, guess what?
 

Reply to Re-presurising boiler not working in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock