Discuss Viessmann combi starts when cold, mixer, tap is opened in the USA area at PlumbersForums.net

Messages
3
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds!
Can anyone tell me what is causing this?
And how to cure?
 
Needs a non return valve fitting on the cold to the boiler and a shock arrestor
 
Thank you Shaun for your reply and solution.
Might changing the tap from a mixer to two singles also cure the issue? {they are 45 years old!)

No as the issue is when you shut the tap a shock wave goes back through the pipes to the boiler and moves the flow switch
 

Reply to Viessmann combi starts when cold, mixer, tap is opened in the USA area at PlumbersForums.net

Similar plumbing topics

  • Question
Milky hot water. Recently had a Viessmann 100-W combi boiler installed. Now when the hot water reaches any tap it is very 'milky'. This appears to...
Replies
1
Views
390
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
224
Got intermittent hot water coming the from a combi boiler to kitchen mixer tap when it hits the T junction for the upstairs bath it's hot, but on...
Replies
0
Views
440
Hello, I have a few mixer taps to install in bathrooms and kitchen. The kitchen tap also has a wondering spray arm capability. On researching...
Replies
8
Views
833
D
hello! while saving up for a new plumbing and heating installation for my new one bedroom flat, i did a lot of research on different boilers and...
2 3 4 5 6
Replies
51
Views
4K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock