Search the forum,

Discuss washing machine and dishwasher supply hoses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
21
Some w/m and d/w supply hoses come with an integral fitting of some kind attached to the hose near the inlet/ w/m tap end of the hose - i dont mean the horseshoe crook to ease entry to the stand pipe.
All Panasonic supplied hoses seem to have this type of arrangement. What is it?
 
It's the solenoid, There is a filter there too that can be removed to be cleaned
 
I dont know what it is - i dont have one at hand i've merely seen them. Googling shows the type but, so far, no explanation is forthcoming.
 
manchester gas, just noticed your post,
where can i see an exploded view of this?

Thank you both for your replies in the meantime.
 
it's an aquastop valve BSH091058.jpg
 
To go back a little:
The "fitting" is on the supply hose near the supply tap, it's not on the app. itself.
AW, thank you, The machine pics are of name brands including Panasonic.
 
JP, thank you too:
that definitely looks like the thing - altho a little bulkier - can you direct me to more mfr's info or details?
 
JP, thank you too:
that definitely looks like the thing - altho a little bulkier - can you direct me to more mfr's info or details?

here's some more info [video=youtube;88Asy_MIH3s]http://www.youtube.com/watch?v=88Asy_MIH3s[/video]
 
Thank you all for your time and knowledge.
Just to re-cap, then the Aqua hose purpose is to give double wall protection, and the outer wall will be a secondary protection against any leakage or bursting of the inner, or primary wall, plus the device near the hose inlet will shut-off the incoming water - or, at least block it.
 
Status
Not open for further replies.

Reply to washing machine and dishwasher supply hoses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
197
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
193
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
167
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
730
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock