Search the forum,

polyorc pipe

Discuss polyorc pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

drainrod

Messages
92
where can I get good safe connections to join onto 3/4" polyorc then go onto copper?
dont have the time available to use glued joints as water cant be off for long
 
Hi is polyorc similar to hunter Genova ? We have a large housing estate full of this material.
I've been using a John guest coupler it's a 15mm to 1\2 inch and 22mm to 3\4
Gets me to copper quickly good luck
 
Status
Not open for further replies.

Reply to polyorc pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Copper pipe 15mm burred shower mixer fitting
Hi, hope all is well! I’ve fitted a compression cap on two of my shower mixer copper pipes (15mm). One of them has scratches and burring and is very slightly out of shape. It leaked but I added some PFTE tape over the olive and it seems to of done the job. However… I’m tiling the wall and...
Replies
1
Views
363
Ben-gee
B
T
Corrosion on Pipe / Fittings
Hi, I am probably being unduly paranoid here but I noticed under our kitchen sink that there is some corrosion evident on a small section of copper pipe between compression fittings on the hot water feed. There are take offs for an outside hot and cold tap together with isolation valves and...
Replies
9
Views
240
ShaunCorbs
ShaunCorbs
A
Connecting To Old 3/4" Copper Pipe That's Smaller Than Usual
Hi, I'm trying to connect 3/4" copper to 22mm copper in an old house. However it appears that the 3/4" is actually slightly smaller (measured at 21.1mm) than it normally is. This means I've been unable to use the special 3/4 to 22mm compression fittings as the olive is just too loose...
Replies
6
Views
565
ShaunCorbs
ShaunCorbs
A
Water Supply from Washing Machine Feed
We have a utility room with a washing machine but no sink. Wife wants sink. There is room to fit one and the waste will connect to wahing machine waste but the problem is in the water supply. Currently there is only hot and cold washing machine hose fitting isolators attached to very short...
Replies
22
Views
429
ShaunCorbs
ShaunCorbs
johnd1881
Copper driancock pipe lagging
Hi, I wonder if I could have some advice please. I have a rental shepherds hut with an outdoor copper bath. I expect to close down for winter when the weather gets very cold. The majority of the piping is blue mdpe which is lagged. But where it joins the tap it's copper. I have lagged what...
Replies
4
Views
337
johnd1881
johnd1881
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock