Search the forum,

How to Gas Rate Smart Meters

Discuss How to Gas Rate Smart Meters in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

daredan87

hi all. Hopefully someone can help I did see something in gas installers mag last year and lost it. How do I gas rate smart meters. Specifically the 'Secure' ones used by 'OVO'.
TIA
 
pressing 9 once or twice I think
 
The Gassafe register magazine a few months ago did an article on a lot of these smart meters, was quite good. Go back and you should find the article
 
I think my partner has thrown them away if anyone is feeling generous uploading the article would be fantastic and I'm sure appreciated by many.
 
I will be honest I cut the article out and saved it , christ knows where lol
 
  • Funny
Reactions: Dan
Theres a whole TB on smart meter reading , its TB112,
Log onto gassafes website and download a copy
 
Status
Not open for further replies.

Reply to How to Gas Rate Smart Meters in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
178
Last Plumber
Last Plumber
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Chuck
C
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
229
oz-plumber
O
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
174
exedon2
exedon2
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
120
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock