Search the forum,

Discuss Best fixing you have used in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
We have all had a job where the fix or anchor is awkward but the best methods and folk I have learned from are joiners. The good one are good
Today with chemical material available its easy but what is your worst scenario and method ??
 
If really everything fails, and brick wall crumbles I only use chemicals.
Otherwise I use steel rawl fixing which are very good for plasterboard.
 
Thermalite type block and hanging a boiler
Drill a 100mm deep 7mm hole
Two brown plugs
100mm concrete screws
 
used the dewalt blue tipped concreate screwbolts for the first time today, just pilot hole the wall and screw in. no plug needed. was rock hard
 
used the dewalt blue tipped concreate screwbolts for the first time today, just pilot hole the wall and screw in. no plug needed. was rock hard

They good for red bricks??
 
Those multimonti type concrete screws are great. Ive just discovered tapcon rod hangers. Great on commercial stuff. Saves drilling 12mm holes above your head all day for drop in anchors

_TapconH_IMG_CLP_GB_01_H500_WAUTO.jpg
 
Those multimonti type concrete screws are great. Ive just discovered tapcon rod hangers. Great on commercial stuff. Saves drilling 12mm holes above your head all day for drop in anchors

View attachment 29905

Hilti do them as well very good
 
Status
Not open for further replies.

Reply to Best fixing you have used in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock