Search the forum,

Tap identification please

Discuss Tap identification please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Eyespy999

Eyespy999

Plumbers Arms member
Plumber
Messages
148
I know its a long shot but been sent this photo from a customer of a tap that is leaking, no visible
identifaction so unsure if they are repairable. Any help appreciated!

IMG_4631.JPG


IMG_4632.JPG


IMG_4633.JPG
 
Exactly the same as my kitchen.
Chinese, I'm afraid only way is to remove the insert and measure all the dimensions.
 
nice easy change

honest opinion its the cost of the tap, labour will be the same either way

Bristan Monza EasyFit Mono Mixer Kitchen Tap Chrome
 
Depends to be honest on the quality of the metal work of the tap and overall condition.
That tap looks excellent condition, - so if the handles aren't made of some sort of rotting alloy and come off easily, then I would just replace the ceramic works that is faulty.
Carry a spare tap with you, plus a box of ceramic works and you might find you have works that match and only a 5 minute job.
I fix most mixers first visit.
 
Looks like a Blanco tap to me. They use a 28 spline ceramic gland not the usual 20. Look to pay between £40 & £80 for a pair of glands.
 
Status
Not open for further replies.

Reply to Tap identification please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
216
Dave Moore
D
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
228
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
221
exedon2
exedon2
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
297
Chuck
C
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
220
Firefox
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock