Search the forum,

Discuss Biasi Boiler Low Pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

RSM

Messages
3
Hi All,

Hope you can help as we have just moved into a new house that has a Biasi boiler in and is low on pressure. My knowledge is very low but I must be missing something obvious as I cannot work out how to fill the boiler? Pictures attached.

15032297857611190888817.jpg


15032298192491734879439.jpg
 
Silver flexi pipe first pipe with the valve on it

Your looking to get on the boiler pressure guage about 1-1.5 bar cold

Open the valve slowly
 
Thank you for the fast reply. Excuse my ignorance but I presume you mean the one further to the back with the screw on the front? If so how far should I turn the screw as I've tried this with no luck and didn't want to unscrew too far
 
Thank you for the fast reply. Excuse my ignorance but I presume you mean the one further to the back with the screw on the front? If so how far should I turn the screw as I've tried this with no luck and didn't want to unscrew too far

No the one on the left the front one

The one you unscrewed was the port for the double check valve
 
Shouldn`t you close the filling loop afterwards?
 
Status
Not open for further replies.

Reply to Biasi Boiler Low Pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock