Search the forum,

Valliant Echotech Pro24 repressurise - no flexi loop or valve taps

Discuss Valliant Echotech Pro24 repressurise - no flexi loop or valve taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Tommylives

Messages
2
Hi - I have a Vallian Echotech Pro24 boiler with low pressure and F.22 error displaying. Ive researched how to repressurise and a lot of video/ threads suggest this should be straight forward however there is no flex-loop, no obvious places to attached a flex-loop and no valve taps as described for an internal flex-loop. attaching photos.

Can anyone advise?
 
IMG_3483.JPG
IMG_3483.JPG
IMG_3484.JPG
 
any chance of a picture further back of the piecework?
 
Im sturggling to see the pictures, appears as a compressed download file and can't get them to decompress but I believe the filling loop valves are right under the bottom of boiler with little handles, pretty sure Eco's didn't supply the typical external silver loop. The valves do have a tendency to pass though once you mess with them and could possibly start passing water through which would increase your pressure even when theyre turned off.
 
Sutty said:
Im sturggling to see the pictures, appears as a compressed download file and can't get them to decompress but I believe the filling loop valves are right under the bottom of boiler with little handles, pretty sure Eco's didn't supply the typical external silver loop. The valves do have a tendency to pass though once you mess with them and could possibly start passing water through which would increase your pressure even when theyre turned off.
Click to expand...

The pictures are viewable without the need to download them you should be able to see them on the forum
 
You need to look in all the cupboards, airing cupboard, have seen them fitted in some strange place's, may not even be the chrome type, could be anything, But their must be something to fill the system
 
None of the Vaillant Pros come with internal filling valves loop you will have an external one somewhere which will look similar to this.

FillLoop1.jpg~original
 
Status
Not open for further replies.

Reply to Valliant Echotech Pro24 repressurise - no flexi loop or valve taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
Changing to tap that has flexible tails
Hello, I have bought a new tap for my kitchen as the old one is leaking and not working very well even after changing the cartridge. The current tap is connected directly by copper pipes but the new tap I've got has flexible tails. My plan to change the tap is: Note which pipe is hot/cold...
Replies
4
Views
1K
Pickwickpick
Pickwickpick
B
  • Locked
F22 and filling loop only one handle..
Hi, stupid question but can anyone help...? I had an F22 message on my ecotec pro 24. From what I've seen online I understood I had to use a screwdriver on the valve at the top of the filling loop (my filling loop only has one handle) but there isn't anywhere to use a screwdriver.... Just...
Replies
8
Views
2K
Badger10
B
A
  • Locked
Vaillant Ecotec Plus 637 - help required no filling loop
Hi there, I have an F22 fault on my boiler, we only moved in recently and had a radiator removed for some work to take place on the wall behind. I am presuming this has reduced the water pressure in the boiler which is why we are without central heating. The help guides and videos I have...
Replies
10
Views
9K
jtsplumbing
jtsplumbing
B
  • Locked
Ideal Locgic Combi 30 - Leaking Filling Loop (whilst trying to repressurise)
Hello - i am trying to repressurise the boiler as its now at zero pressure. When connecting the filling loop (which is quite short and has a braided pipe), I then turn the filling loop isolation valves to the open position, and water leaks from both taps (blue and black). There is no...
Replies
2
Views
867
Cainan
C
S
  • Locked
No filling loop and red expansion vessel installed. How to represurrize heating?
Hi, I need bit of an advice about finding the filling loop in my heating system. Apologies for long description but thought to cover as much so relevant solutions can be suggested. I have spent endless hours searching internet including this forum and everywhere it is mentioned there must be...
Replies
28
Views
5K
Alex Knight
A
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock