Search the forum,

Discuss booster pump what is the problem please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
92
salamander twin impellor pump fitted under sink to boost tank fed supply to hot at sink, basin, shower, been in 10yr problem now is that if you open sink or basin tap -pump runs ok
open hot at shower valve, cold at shower and basin pump doesn't switch on,BUT if youopen hot at basin then turn off and open shower or cold basin before pump cuts off the shower h&c and cold at basin runs perfect????????
 
If it's not starting up then it's not detecting water flow.

I've never fitted one of these but looking around they appear to detect flow not pressure drop, so the most likely fault is the sensors or pcb.

Don't get distracted by the symptoms, the basic fault is sometimes it works, sometimes it doesn't.
 
If it's not starting up then it's not detecting water flow.

I've never fitted one of these but looking around they appear to detect flow not pressure drop, so the most likely fault is the sensors or pcb.

Don't get distracted by the symptoms, the basic fault is sometimes it works, sometimes it doesn't.
thanks for that, new pump it is then
 
Could be shower inlet filters. Take your shower valve off the wall (if you can) and clean the inlet filters... obviously it's the hot (left side, usually) that's the issue.
If the pump is running fine for your basin tap, the flow restriction is in your shower valve or the filter.
 
I had few times same issues and it's either the wrong pump or filters inside the shower valve which restricts the flow rate. Basically I'd be looking to get a good plumber out unless your feel confident enough to do it on your own
 
thanks for help guys, I had checked filters too
all that was required was for to be reset--- switch off for ten seconds, turn on till green light comes on,then switch off for exactly 3seconds,then switch on again and you find pump is working perfect
 
Status
Not open for further replies.

Reply to booster pump what is the problem please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
147
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock