Search the forum,

Discuss Replacement part for push/pull lever sink plug. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Liz

Messages
4
Hi there,

My nephew pulled off an already slightly coroded under sink connection rendering our pull/push lever sink plug useless and leaving us with a hole under the sink which leaks if water is run in to the basin. I've got several photos showing the mechanism and i'm hoping someone might be able to please advise what part I need and where to obtain this. I have also noticed a manky grey plastic grid ring in the drain which is now no longer connected to anything so I am assuming I also need this part. Do I need to try and unscrew the entire plug hole in order to replace the pull lever system? Thanks Liz

View attachment DSC_5538.JPG

View attachment DSC_5537.JPG

View attachment DSC_5539.JPG

View attachment DSC_5540.JPG
 
Thanks very much for your help. Does this kit contain a nut to seal beneath the sink for the one that was corroded do you know?
Do you mean where the Black tape is in photo 5539? or the larger nut below on the waste itself?
 
Status
Not open for further replies.

Reply to Replacement part for push/pull lever sink plug. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock