Search the forum,

Discuss What do I need to cap these pipes? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
17
Hello,

Please forgive my ignorance but I was hoping someone could let me know what I need to cap these two pipes so I can disconnect my tap and toilet from the water supply... the toilet one has a screw on it - is that for isolating the connection?

Many thanks!

Ross

5F857090-F8D4-464D-A0CC-31B5C16B62BD.jpeg


F68A4E9F-2232-48B1-BAEA-BE788C3AF039.jpeg
 
Turn the screwed one to quarter to three . In otherwords horizontal . The other pic needs a 15mm cap but with a fibre washer in .
 
Personally I would isolate the water and use a 15mm insert and pushfit cap after the isolation valve on the toilet and remove the coupler from the bottom union on the tap connection and use a 15mm compression cap
 
Personally I would isolate the water and use a 15mm insert and pushfit cap after the isolation valve on the toilet and remove the coupler from the bottom union on the tap connection and use a 15mm compression cap
And make sure the insert is inside the pipe for the tap
 
Status
Not open for further replies.

Reply to What do I need to cap these pipes? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock