Search the forum,

Brain Teasers - which one will fill first?

Discuss Brain Teasers - which one will fill first? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Dan

Dan

Administrator
Staff member
Admin
Messages
2,782
65195-4bbff3c3dc9fd393654e32eaca51fbb9.gif
 
F, 3 and I have no idea, so I will say the same.
Nice to hear from you though @Dan

Edit due to being an idiot and not looking at the diagram properly
 
Last edited:
edit, - I had another look and nearly reversed my answer!
So much can be missed! :p
 
G and 4 if the tap is running slowly, A and 1 if it is running fast. Slightly down on the left due to the weight of the thread and the ping-pong ball although the question setter probably intended these to be negligible, in which case no change.
 
Status
Not open for further replies.

Reply to Brain Teasers - which one will fill first? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

userrrr
Water keeps filling from output valve
Water keeps filling up my home water tank from the output valve at the bottom of the tank and not from the top of the tank Water keeps pouring in from the output valve and won't stop, making the tank overflow 24/24 At first we thought it was the input valve at the top but after inspection we...
Replies
1
Views
143
ShaunCorbs
ShaunCorbs
U
My first experience with CheckATrade
Hello all, I have just joined, after being pushed into some DIY plumbing. Here is my first plumbing DIY effort. I had a cistern lever that didn't flush properly, and had become corroded and unsightly. I figured I'd get a plumber in to do it (after a couple of years apologising to guests for...
Replies
2
Views
409
Bogart
Bogart
ThirtyTwoer
Noisy, vibrating shower when first turned on.
I have a problem with noise and vibrations from my shower when i first turn it on. The problem lasts for about 30 seconds after the shower is switched on before it stops. There is a sink nearby, sometimes if we switch that on slowly before turning on the shower then the shower doesn't make a...
Replies
0
Views
301
ThirtyTwoer
ThirtyTwoer
T
Can I use push fit type tap connectors on toilet fill valve
Hello, I have a troublesome fixed 15mm copper pipe with isolation valve going to my toilet fill valve. It's too tight for a Flexi hose. Can I use a push fit tap connector instead which will give me more flexibility in fitting?
Replies
4
Views
379
Jerry
J
king of pipes
Sunday afternoon teaser
A little brain teaser for you chaps had a call yesterday my boilers not working ? see if you can spot what I found
Replies
11
Views
1K
king of pipes
king of pipes
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock