Search the forum,

Baxi DuoTec fault codes

Discuss Baxi DuoTec fault codes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Lambed84

Lambed84

Gas Engineer
Messages
55
Anyone know what the fault code e166 relates to on the above boiler?
Thanx in advance gents
 
Definately E166 cannot find anything about it,what exact model Duo-etc is it?
 
Just looked on baxi works no e166 but i would think it a pcb problem . cheers kop

Screenshot_2017-11-19-18-00-38.png
 
Doesn't mean anything just a glitch turn off main power to boiler leave for 5 min then switch back on was told it clears something on PCB.
 
Had a pump fitted Friday by another engineer. Turned boiler off at spur. Left for a few minutes, turned on and e168 appeared. Reset and ran fine for an hour. My guess is water ingress at pcb.
Cheers lads
 
Status
Not open for further replies.

Reply to Baxi DuoTec fault codes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Stigster
Stigster
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
198
cheddarman
C
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
203
Dave Moore
D
Dan
  • Sticky
Australia Morning Thread
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
61
Dan
Dan
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock