Discuss Cross head tap removal.... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

thereisawizza

Plumbers Arms member
Plumber
Gas Engineer
Messages
672
afternoon all, anyone come across these taps? Need to change a cartridge and can’t work out how heads come off! Tried the obvious pulling etc, on a Belfast sink so can’t get to the back to fit new taps..... Cheers all

86417D71-B415-4452-A581-ADF3D7137C81.jpeg
 
The bit under the handle with the grub screw, does that turn with the handle? If so, undo the grub screw and it will come off.
No grub screws! I think I might have to bite the bullet & drop the sink for new taps....
 
Wow word work is in a bit of a state, what are the hose pipes for ?
 
Are you sure that these have ceramic discs could be rubber washers, have you tried unscrewing the large chrome section
 
Status
Not open for further replies.

Reply to Cross head tap removal.... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.
Back
Top