Search the forum,

Hetas alternative???

Discuss Hetas alternative??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

stokecity

Gas Engineer
Messages
137
Does anyone know if there is an alternative body to use than hetas
 
Status
Not open for further replies.

Reply to Hetas alternative??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

W
Ideal standard push Btn flush valve
Hi all, I am trying to find an alternative flush valve to fit the cradle of a ideal standard push btn flush. It is all tiled in and changing to a Siamp or fluidmaster is not an option anyone have any ideas Thanks
Replies
9
Views
333
Ben-gee
B
M
Aqualisa Shower Pressure Problem
When I turn on the shower or bath, initially the pump runs (quite loudly) and only a trickle comes out. I have to alternate turning on the bath and shower before I get a reasonable flow. Then once it is running, if the water is at maximum temperature on the mixer it flows smoothly, but as soon...
Replies
0
Views
81
MA_Bling
M
B
Do I need a washer for blanking plug in a copper hot water cylinder?
Hi all I'm blanking a couple of openings in a hot water cylinder. The Screwfix Flomasta 1" BSP plugs fit perfectly but no washer supplied or listed. Given that the element has a washer and everything else is a compression fitting I'm concerned these should have one. The alternative is PTFE...
Replies
1
Views
329
ShaunCorbs
ShaunCorbs
G
Sizing Heat Sink radiator for wet hetas install
Hi - I've had some conflicting advice so looking for confirmation please - what size should a heat sink radiator for a log burner/boiler be? I've been told by one installer 10% of output to water and another 20%. I can;t find aything in building regs and can;t find a HETAS document with that...
Replies
0
Views
540
G-laaar
G
J
Undersized radiator?
I have had some old radiators replaced. Having checked the btu calculation myself, the new radiator is slightly undersized. It should have been 6150 btus, and the k1 rad that has been fitted (the required width in order to fit the old pipes) is 6025 btus. Output wise the next rad up would be a...
Replies
4
Views
459
Last Plumber
Last Plumber
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock