Discuss Cost to repaire boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 34,309
- Solutions
- 2
what price have you been given?
O
Old Account
It really depends on the company or engineer.
He needs to be fully gas safe registered to start with. Prices are vary rom city to city.
- Messages
- 34,309
- Solutions
- 2
And it is ?
O
Old Account
What is the quote given if you don't mind me asking
O
Old Account
Before we can give you a direction perhaps you can let us know then we can tell you yes it sounds about right or it's a rip off
- Messages
- 8,642
Tell me how you can work out the labour cost ? , if you are asking us how much you should be paying .
You can find the parts price very easily .
You can find the parts price very easily .
O
Old Account
Why not asking some local engineers and get some couple of quotes to compare
Can't find a part called hot water flow turbine valve to get a price on. Would it be called something different like turbine cartridge. I've been quoted 500 quid plus.
O
Old Account
Seems a little high to me from the first look but better of asking the gas safe engineers on here. They'll surely comment on that
Is it £500 plus materials or including ?
Is it £500 plus materials or including ?
It's including parts but looking at parts costs if I'm looking at the right parts there only about 95 quid including vat. Any idea who I can as for an answer.
- Messages
- 34,309
- Solutions
- 2
Don't glow worm do a fixed price repair/repair service
- Messages
- 34,309
- Solutions
- 2
Excellent thanks fella. Just had a look and sounds way better and half the price.
My daughter had a FPR from Ideal. They phoned to say there was a drip. Ideal said they would want £280 upfront to call, because the problem may not be theirs. Fair enough. But if the problem WAS related to earlier job, they would hold, IIRC, £140 as a call out fee.
Just saying. Check T&C's. Manufacturers are pulling the rug from independents, then crapping on the punters.
EDIT: Just checked G/worm link. The PARTS are guaranteed 12 months. Labour 90 days. So if the problem represents in 91 days you are hot by their repair fee. Which is probably £249
Just saying. Check T&C's. Manufacturers are pulling the rug from independents, then crapping on the punters.
EDIT: Just checked G/worm link. The PARTS are guaranteed 12 months. Labour 90 days. So if the problem represents in 91 days you are hot by their repair fee. Which is probably £249
Hmm. If the OP uses the Glow-worm repair service, would the company's liability be limited to 90 days, or would the Consumer Rights Act still make Glow-Worm legally liable for whatever supplied to last a reasonable time? Normally with warranties 'your statutary rights are not affected' because they can't be: they are statutary rights.
- Status
Reply to Cost to repaire boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds!
Can anyone tell me what is causing this?
And how to cure?
Hi,
My current hot water system needs to be replaced.
Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off?
An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au.
How reliable is this...
Hi All
I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall)
Unfortunately turning this to the closed position only reduces...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 2
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3
-
-
-