Search the forum,

Hive active heating 1

Discuss Hive active heating 1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Jon1985

Jon1985

Messages
3
Hello everyone

My Mum seen active one heating with the receiver and heating hub (thinking the hub was room stat) for £10 on gum tree and purchased it. They rest of the house is all ready set up with all smart hive equipment.(I know its not the best)

So no Rf room stat.

So my question is what Rf room stat can I fit?
Or, does it have to be Hive if so can get them on there own?
Or am i telling her waste time and to throw it?

Thanks for reading sorry my English is terrible.

Jon
 
You should have three units with the hive one programmable stat, one receiver and hub
The thermostat is built in programmer
 
Sorry I obviously did explain it that well. I am missing the programmer.

So wondering if i have to get one form hive?

Can I get one on its own? Or need by the pack?

Or does any other alternative programmer work?

Jon
 
As far as I’m aware you can’t buy the programmer on its own and the hive won’t link up to any other programmer, the receiver searches for a hive programmer plus when you set up an account it will ask for a hub ID which is on the back of the hub if the hub has been used it will already be linked to another account.
You may have to ring or email hive home and ask the question
 
Status
Not open for further replies.

Reply to Hive active heating 1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

N
Hive Heating & Hotwater install to Vaillant Thermocompact VU GB 242/1
Hi, I am trying to link a Hive heating & hot water dual channel receiver to an old Vaillant THERMOcompact VU GB 242/1 E system boiler. It has an internal programmer that is similar to a time switch 120 (plug in seven day programmer) This programmer is connect to a terminal strip using 345 (three...
Replies
0
Views
401
Nitesh Bharadia
N
G
Hive Active Heating Thermostat V3
Hi I’m looking to install the above. Atm I have an older one fitted (old wireless thermostat and old receiver that’s wired into my combi boiler. Pic below shows how my current one is wired, live neutral and would the 2x black wires be switch wires and would matter what way they were wired in? My...
Replies
4
Views
544
Glasgowman
G
S
What hive do I need?
Hi everyone, i was looking for advice on what hive I need to buy. my daughter bought a new build house and she want to switch the existing thermostat control to a hive system. she has a logic system s15 boiler in her kitchen with is linked with a Siemens rwb27si timer under it. she has 2...
Replies
8
Views
1K
ShaunCorbs
ShaunCorbs
B
Help with Drayton Wiser hub and TRVs
Would like some help please as my Drayton Wiser system is a mess. I had 2 TRVs in the lounge, one in the main bedroom, the rest of the house - 6 other radiators and 2 bathroom towel radiators are just normal valve s. We live in a 4-bed, 3 storey house, as converted loft. Common problems were...
Replies
3
Views
387
ericmark
ericmark
ericmark
Google Nest Central heating control how to improve?
I have a home with an oil boiler in a garage turned into a flat, heating both flat and main house, running c plan with two pumps, two motorised valves simple bi-metal thermostat on wall in flat with 4 standard TRV's rarely used so not worried about the flat, and main house has Nest Gen 3 in the...
Replies
0
Views
345
ericmark
ericmark
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock