Search the forum,

Discuss Setting pump speed for UFH in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
25
I've just had a new UFH system fitted with a Reliance Thermomix control pack, which incorporates a UPM3 Auto pump. I'm wondering how you arrive at the best setting for the pump - it is providing flow to 6 separate pipe runs, designed as two zones controlled by wireless thermostats. I feel it would be best to set it to Proportional Pressure Auto Adapt mode - but I'm no expert and would welcome advice.
Thanks
Roger
 
I have a feeling that constant pressure autoadapt is recommended for UFH?
 
I have a feeling that constant pressure autoadapt is recommended for UFH?
Thanks for the advice - however since posting I think I have another problem as all the pump indicator lights have gone out and it is not running. Pressing the indicator button won't produce any lights so it looks as though the new pump has failed after just 12 hours of running. Time to call the installer back, I think.
Edit - pump is OK - it was a communication issue with the wireless thermostat. I've switched the pump to constant pressure autoadapt and will see how it goes, thanks.
 
Last edited:
Status
Not open for further replies.

Reply to Setting pump speed for UFH in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock