Search the forum,

Vaillant Thermocompact 624E Footprint

Discuss Vaillant Thermocompact 624E Footprint in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
ian.

ian.

Messages
56
Hi,

I have a fully working Vaillant Thermocompact 624E system boiler which is about 14 years old and due the unavailability of certain parts is classed as obsolete, my question is what is the equivilant performance Vailliant model system boiler and does it have the same footprint as the existing boiler?
 
Valliant ecotec plus 624 system same footprint will be smaller things have moved on in 14 years good well built boiler with a 5year manufacturers warranty. Cheers kop
 
Status
Not open for further replies.

Reply to Vaillant Thermocompact 624E Footprint in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

N
Hive Heating & Hotwater install to Vaillant Thermocompact VU GB 242/1
Hi, I am trying to link a Hive heating & hot water dual channel receiver to an old Vaillant THERMOcompact VU GB 242/1 E system boiler. It has an internal programmer that is similar to a time switch 120 (plug in seven day programmer) This programmer is connect to a terminal strip using 345 (three...
Replies
0
Views
402
Nitesh Bharadia
N
Z
Vaillant System Boiler With Additional Pump
Hi, i've got a job with a Vaillant Ecotec 630 system boiler, and i don't know the full history but the house has definitely been extended significantly since the boiler was installed. There's now 21 radiators/towel rails. It's getting to temperature, but even after balancing, it's not heating...
Replies
2
Views
524
Zippymark
Z
G
Vaillant Controls - is it possible to mix wired and wireless?
We have an all Vaillant setup - an EcoTEC Plus 637 system boiler plus wired VR720 and VR92 SensoCOMFORT controller, driving two CH zones plus DHW. It all works, but unfortunately we have found that the room stats are poorly located, and so the level of control is not what it should be. We had...
Replies
4
Views
549
gndurant
G
W
Is this Low Loss Header suitable?
I am looking to replace my existing Vaillant heat-only boiler with a new Vaillant ecotec plus 630 system boiler (30kW). I have a megaflo hot-water cylinder, a central heating system (serving 21 radiators) and an orangery built last year (6m x 4m) with underfloor heating. Through running some...
Replies
2
Views
489
windsor-tg
W
J
System or Heat Only Boiler
A (if) CH system has a very high head loss due to improperly sized pipework and long runs and possibly partially blocked pipes and requires a UPS2 pump running at its 8M head to feed 21 rads with a theoretical output of 25kw at a 20C dT. A fairly old Vaillant 438 boiler is being replaced, the...
Replies
16
Views
1K
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock