Search the forum,

Discuss Bosch SKT5102GB/09 Intake Hose in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
5
Good evening everyone!

I am struggling with this countertop dishwasher I bought secondhand to help my husband, who is my full time carer.

It’s an older model, 10 years apparently, and I was mislead when buying as the intake hose wasn’t supplied. When I looked on the Bosch spares website the replacement has red caps on each end and is wrapped in red/silver outer covering. Now, forgive me if I’m wrong, but isn’t red the universal colour for hot? But it has 4 different temperature variations on the units settings.

I cannot seem to find a definitive answer as the instruction book is next to useless!
 
any chance of a few pics of the hose?
 
any chance of a few pics of the hose?
Hey Shaun,

This is the one on the Bosch site

BADB50F5-A96E-4BA3-93DD-19EE021A726D.jpeg
 
They can be hot or cold fill according to the instructions. But you are probably better using cold fill.
 
That's just the same as a standard washing machine hose just twice the price because its Bosch
 
Dish washers tend to be cold fill what model is it ? did you get any instructions with it, if not go onto bosch website you should find the information you require.
 
Dish washers tend to be cold fill what model is it ? did you get any instructions with it, if not go onto bosch website you should find the information you require.
Hi! I did get instructions with it, they are basic and do not say what intake it has (yeah, useful I know!), I have searched for installation instructions and they aren’t any.

It is model SKT5102GB/09. Thank you for your reply JTS x
 
Your instructions say preferably cold fill but if you use hit a maximum temp of 60degrees, there are not many machines now that use hot fill nearly all cold so I wouldn't fret just fit it to cold.
 
Your instructions say preferably cold fill but if you use hit a maximum temp of 60degrees, there are not many machines now that use hot fill nearly all cold so I wouldn't fret just fit it to cold.
Brilliant! Thank you Gasmk1!! You are a star!!
 
Status
Not open for further replies.

Reply to Bosch SKT5102GB/09 Intake Hose in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
300
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
155
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
212
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
365
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock