Search the forum,

Discuss Slight drip brown water from nut / bleed valve area? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
8
Hi, we have 2 rads. where there is slight rusting visible around the silver nut around the bleed nipple. water is coming out but evaporates to leave a brown stain. Can I tighten nut...or will this need replacing? Do I need our usual plumber..or diy? thanks.
 
Sounds like the o ring has failed easy enough to do diy

Turn both rad valves off

Get a container and bleed rad until it stops

Take a plug out with a old towel below to catch any drips

Either replace the o ring or add some ptfe to the threads

Tighten the plug back in

And do the same for the air bleed

Close bleed screw if you haven't already done

Open both valves

Bleed rad

Check for leaks
 
Status
Not open for further replies.

Reply to Slight drip brown water from nut / bleed valve area? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock