Search the forum,

Naughty Naughty Naughty

Discuss Naughty Naughty Naughty in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,167
This is a 1st for me. Usually flexi's connecting a hob.

Called to a smell of gas...

20180327_083300.jpg
 
Normally cut the upstand off and use a flat face washer
 
It's track pipe so that is fine. It is the compression fitting onto a flat faces washer fitting.

You Can file the threads flat though
 
dont see many bent tap connectors, cost more than a st elbow and nut and olive.

did it have the barrier between the top draw and hob underside? the number of kitchen fitters that hate me when i insist on the barrier being fitted is getting quite high.
 
AWheating said:
dont see many bent tap connectors, cost more than a st elbow and nut and olive.

did it have the barrier between the top draw and hob underside? the number of kitchen fitters that hate me when i insist on the barrier being fitted is getting quite high.
Click to expand...
Can't say I have ever seen a barrier fitted, didn't know there was such a thing
 
Status
Not open for further replies.

Reply to Naughty Naughty Naughty in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
462
Chuck
C
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
185
ShaunCorbs
ShaunCorbs
R
  • Question
UK garage shower installation drainage help
is it feasible to connect a flo force or saniflo shower pump drain to a washing machine standpipe
Replies
2
Views
552
redarmy
R
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
349
Last Plumber
Last Plumber
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
250
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock