Search the forum,

Height of new boiler ..........

Discuss Height of new boiler .......... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

Murdoch

Esteemed
Res.Electrician
Messages
1,126
Chaps,

I'm a spark and working on a refit ..... the GSE is going to put the new boiler on the wall very close to the floor - is this OK?

Never seen one low on a floor before.

Thanks
 
If it's to M.I's then it's ok. Going to be a right tw@t to work on in future though, accessing valves etc. Sounds like he's a F.I.F.O merchant!
 
Normally most require 4-6" below the boiler

Any reason why he's fitted it so low ?
 
IMG_1455.PNG
Can't be under a window, unless he can achieve the correct clearance.
 
^^ it’s going in on Friday ..... when I’m back onsite I will take some snaps and post them
 
Status
Not open for further replies.

Reply to Height of new boiler .......... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
176
exedon2
exedon2
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
203
Dave Moore
D
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
184
Chuck
C
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
439
Chuck
C
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
118
Stigster
Stigster
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock