Search the forum,

Discuss What has she got bit confused. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
578
A daughter has move into a property with the following setup. All electric setup with mains pressure HW cylinder. Pic 1 shows normal 3bar relief valve. Pic 2 shows a 3.5 bar valve on the mains incoming and a 6 bar valve going to the expansion vessel. Pic 3 shows the stopcock which has me a bit bemused as to why the incoming water has a stopcock on it, as one would expect,but then a parallel set of pipes directly below?

1.jpg


2.jpg


3.jpg
 
I would say cold mains and hot
 
Will run it up and see. Am assuming the 3.5 bar and 6 bar items are a combination valve.
 
Correct why do you ask ?
 
Status
Not open for further replies.

Reply to What has she got bit confused. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock