Search the forum,

Leaking shower pod/wall hung shower unit

Discuss Leaking shower pod/wall hung shower unit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

Jones82

Gas Engineer
Messages
221
Came across this unusual shower unit.

Sirrus shower, leaking from the hoses on the back, which are perishing.

They are pushed onto spigots then secured using jubilees.

Anyone know where I can get some new hoses?

Thanks



 
RJ Pryces lowestoft keep it you can buy online with them and stainless jubilee clips . very poor design but hey ho cheers kop

Screenshot_2018-05-23-04-58-24.png
 
You can buy that hose any size from any pneumatic supplier such as Thorite cheap as chips
 
I buy it by the metre on ebay. Useful hose for poweflushing, you can see air and muck in the flow, buy different diameters.
 
Status
Not open for further replies.

Reply to Leaking shower pod/wall hung shower unit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

fango7
Leak under shower along wall and ceiling
Hi all, I have a couple of leaks coming under shower tray downstairs. One is along the wall so think might be joint between wall and tray and the other seems to be near waste tray, there is a slight hairline crack in shower tray near waste . This happens when I leave the shower head near the...
Replies
0
Views
250
fango7
fango7
fango7
Shower leaking into wall downstairs
Hi all. Shower is leaking into downstairs when water is being aimed at wall . All sealant has been redone on outside and between shower tray and wall at the bottom on inside , can’t spot any leakages here. It runs down the wall downstairs beneath shower in lines , when water is sprayed at the...
Replies
4
Views
288
murraymint
M
S
Shower leaking at the hose where it meets the shower unit
I've attempted to replace the shower hose from our Aqualisa Lumi electric shower unit. The new hose is badly leaking water out from the connection point and when I reattach the old hose it is now leaking too! Both have been tried with new washers and are as hand tight as they can go (wasn't a...
Replies
3
Views
1K
JohnDeepUK
J
T
Shower Pump on air to water Unvented Cylinder?
Hi, I'm in my new build 2 years and the shower pump has died. I have an air to water unit downstairs is in the utility which I've been told is unvented and pressurised. The cold water feed into this cylinder is from the attic tank, not the mains as I turned off the mains stopcock to see if hot...
Replies
6
Views
160
thegrizzlyone
T
benj987345
Can anyone help an idiot diyer with a shower tray?
I've got an issue with the shower tray not being totally flat. As you can see from the photos, it is about 7mm out at one side. It's leaning towards the waste end though. The shower tray is pushed underneath the tiles. My mate did the tiling and I now realise that we should have put the shower...
Replies
5
Views
504
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock