O
Old Account
Thank you. So I will install the flue as it is currently but with the facade flue.cant use a plume kit
Would you install it the same way as it is ?
Discuss Advice needed............ in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Thank you. So I will install the flue as it is currently but with the facade flue.cant use a plume kit
Best bet is to ask Vaillant. I cannot see the full run/route/distance.I
Thank you for coming back to me.
I spoke to Vaillant today and I just double check with a system designer if the plan we have made is alright. I also asked for a product list so it will be a lot easier to pick the right components. Thank you for the advice with the flue. I definitely need to get a bigger flue in than the normal one. However, do you know if I could just use a plume kit or will I need to divert it like in the picture?
Thank you.Best bet is to ask Vaillant. I cannot see the full run/route/distance.
I'm sure on the 466 and 656 you can go 22 meter plus 3 elbows but the Air intake must be 4 meter or less away from the flue system connection to the Boiler.
Ask for a copy of the Commercial Systems catalogue.
Sorry shauni,you also don’t get the point what I am after. I am not after a price list with prices but I am after that someone gives me a product list of what Vaillant is producing so I am able to design it myself with Vaillant products only.They don't do that
Upto you to build and price your own system and they don't offer prices direct you have to go to one of your suppliers
Sounds like you have it made in Germany
Sorry but don’t understand youLike what divcons llh controls etc look on there website
Sorry but don’t understand you
That’s kind of stuff I am looking for. If you see my hydraulic plan and the list above you can see everything is done froma mate who works at Vaillant. They design the system with their products within minutes based on your details you give. But thank you shauni I will call them tomorrow to ask for the cataloguewhat are you looking from vaillant a whole product list of what they make
if so contact your uk rep and ask for a catalogue of there boilers and controls
Yes that’s the stuff I am looking for but from Vaillant. I will try to arrange an appointment with them. Perhaps the rep or designer will come out to access the job
Shaun's right there. Heating Engineers job over here. Unless you want to pay someone else to do it but I don't know why anyone would.
The closest you'll get from Vaillant to the kind of help you're looking for is to contact the 'commercial' rep for the type of job you're looking at there. You'll still need to have all the fact and figures but they will help you with the material list if you need it.
That is very true. Depends on the rep.Thing is it's not a commercial system/ size so he might get arsey with you also will tell you to phone the domestic side up
Hey last,That is very true. Depends on the rep.
All the info is in that Commercial catalogue I told you to get hold of anyway. We have always specified our own work whatever the size.
If I install vaillany ecoTec 637 system boiler it will use 4.0m3/h is that correct t ? So if I have g4 meter which is capable of 6m3/h do you think by having a gas hob it won’t be enough and dangerous ?What do you think also why haven't you calculated the gas load 45kw boiler takes 5m3/h hope they don't have any other appliances
Hey last,
I appreciate the opinions and advise I got from you and Shaun. I already got the catalogue for commercial but it’s more commercial boilers etc... it will not suit the system I am thinking off. It is first of all too big and second,y I wouldn’t be able to install it anyway.
They will get back to me tomorrow regarding my design and figures. One of the designer from Vaillant will contact me so I am hoping to get the right answer if not I am going to design it myself and have to choose the parts Online. I would have thought it is very similar like in Germany but it doesn’t seem like it but I will definitely get the right flue you were recommending to me. I will also keep you updated with the installation which I will do in the next two weeks.
I thank you and all the other people for now, it is definitely much appreciated from my site
I cannot tell you if the ufh is designed properly. It’s not cheap to lift oak wood I am hoping that people haven’t used 6mm ply,on top of it 18mm and then 16-18mm oak wood. If that’s the case they can what ages for their heat. I do not even know what has been used as ufh , what Typ of insulation or method.Correct heat loss the property where there are rads also take into account what the ufh has been rated at has it been designed correctly
I haven’t priced it yet but will do this week. I will design the system myself if they do not have such list. It ain’t hard .. I just wanted to use Vaillant products only. Don’t you worry the system will be up and running in 3/4weeks time.How can you install it also price it when you haven't decided/ designed the kit that you need also how have you given them a price ?
I cannot tell you if the ufh is designed properly. It’s not cheap to lift oak wood I am hoping that people haven’t used 6mm ply,on top of it 18mm and then 16-18mm oak wood. If that’s the case they can what ages for their heat. I do not even know what has been used as ufh , what Typ of insulation or method.
If they had they would have showed me the design. I asked many times when I was there but they do not have a design. When they refurbished the property they have been overseas and that’s perhaps the reason why they don’t have it. They only thing I could see last time was they have got 6mm ply,then 18mm, and on top of it about 16-18mm oak wood. But cannot see the rest of it.They should have a design/ spec for it will tell you the kw required
That’s a good idea.IF you know the make you could try and ring the manufacturer up and ask if they did the designs ?
Does this exist here in uk ? From Vaillant directly? I could not find it
I would like o ha e hat from Vaillant. Have you got any link by any chance ?Div cons yes they do but you can go third party like in my links
Reply to Advice needed............ in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.