Search the forum,

Quadra waterfall bath shower mixer, two screws missing.

Discuss Quadra waterfall bath shower mixer, two screws missing. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Drip problem

Messages
15
Hello,
I really need help on how to fix this issue, we purchased this from better bathrooms over a year ago.
But recently two small screws from underneath the tap have come loose in the pic shown. This means when the tap is switched on water comes through the holes, as well as the tap.
The screws are tiny, but I don't want to have to replace the hole unit for the shake of this. Could something be used to plug the holes, any suggestions would help or if I can replace the screws.

DSC_0053.JPG


DSC_0054.JPG


DSC_0055.JPG
 
They hold the strainer/gauge in place don't they...although it's quite tight? Clear silicone in the holes wouldn't harm
 
Ct1 or stick all clear but all you really want to stop is the water coming from the holes.
 
Funnily enough I came across the exact same issue on a quadra basin mixer tap today! When I removed other screw and the strainer it turned out that threaded block had completely disintegrated. Tap was only about 2 years old and customer had purchased from Victoria Plum, so advised to contact Vic Plum for replacement.
 
Status
Not open for further replies.

Reply to Quadra waterfall bath shower mixer, two screws missing. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
0
Views
109
ChrisGid
C
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
203
Firefox
F
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
199
Dave Moore
D
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
Chuck
C
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
5
Views
130
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock