Search the forum,

Discuss Grohe inlet valve(Grohe Rapid 3 in 1) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
9
Hi, if anyone can advise me on the following i would be grateful.
The images attached show the water inlet/isolation valve that comes with the grohe 3 in 1 toilet frame. The large connector appears to be 1/2" male and is tapered. the instructions are not clear what fitting this should connect to behind the cistern. With it being tapered does it require something specific?

Any advise appreciated

Neil

20180801_103033_1280x720.jpg
20180801_103057_1280x720.jpg
20180801_103120_1280x720.jpg
 
if you're talking about the thread on the right of the first image, that part is outside the cistern.
Any 1/2" female fitting should fit onto that.
That is a connection that will not be accessible after the cisten has been installed, so make it a good one
 

Reply to Grohe inlet valve(Grohe Rapid 3 in 1) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock