Search the forum,

Discuss Corvec Brittony II Multipoint in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
4
We have a Corvec Brittony II multipoint that will only ignite the main burners if the temperature control knob on the front of the multipoint is turned up to its maximum heat setting - making the water too hot to use. Do you know what the problem could be?
 
Ok 2 yr ago so it is not due a full service for another year then, Did you have the basic service done last year? I would still have a full service carried out by your local GSR as it sounds like it needs one & they could also see if anything else is wrong while they are there. I do suspect what is wrong with it but am not willing to share this due to people trying to have a go themselves at mending their own gas appliances by reading these threads. Not saying you would be that daft though. Hence the advice to have a full service done as what I think it is will be changed on a full service.
 
Thanks Darren, hopefully it is not a major component/problem then. Are you in the Kent area and if so what would be your charge for a full service.
 
Good advice from the guys above ^^^ , be aware some parts are getting hard to get hold of for these mulipoints , don’t throw a lot of money at it , it maybe time to change it depending on its age .
 

Reply to Corvec Brittony II Multipoint in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock