Search the forum,

Oil pump pressure on B11Heatslave 20/25

Discuss Oil pump pressure on B11Heatslave 20/25 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

R

richard3009

Messages
74
As a ballpark figure what pressure should I expect on a b11 burner Worcester Heatslave 20/25.
 

Reply to Oil pump pressure on B11Heatslave 20/25 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

R
Locked out & smelling of oil
Hi, we have Worcester Bosch heatslave external oil boiler 18/25 Boiler locked out. Pressure was below 0.5 so brought pressure back up. When lock out is reset the burner attempts to light but sounds like a bag of spanners and cuts out again smelling strongly of oil. We have plenty of oil & the...
Replies
2
Views
1K
rose cotts
R
G
Oil boiler not heating up
I have a danesmore 20/25 oil boiler and it is firing up but it’s producing no heat to the water or the radiators My next door neighbour an electrician has checked the cylinder and thermostat and they all check out ok so he thinks the problem is within the boiler Can Someone help give me some...
Replies
1
Views
381
SimonG
SimonG
B
Identify Wilo pumps
How do I decipher Wilo pump numbers? As an example what is the difference between a WILO ST 20/6-3 P and a WILO ST 20/7-3 C or a WILO ST 25/7-3 P Some pumps mention "2,6uF - 400VDB / ~ 230V - 50Hz" on the front panel, is this the start capacitor value? Thanks!
Replies
6
Views
282
Biffothebear
B
A
  • Question
Low hot water pressure in entire house (Heatslave External 25/32)
We have low hot water pressure in the entire house. Boiler is a Heatslave External 25/32, fuel in kerosene. The central heating is still working. Water initially heats up but soon flow ceases. The gauge pressure is correct. Do I need to release air or residue somewhere? Thank you.
Replies
0
Views
259
Abram R
A
Abram R
  • Question
URGENT Low Hot Water Pressure (Heatslave 25/32 External)
Hi everyone, we have low hot water pressure in the entire house. It doesn’t appear to be a problem with the boiler. A Heatslave 25/32 External. The central heating works. The hot water runs for a moment before shutting off. Should I be clearing residue or air somewhere? Thank you, Abram
Replies
0
Views
391
Abram R
Abram R
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock